Development of a 3D model, as-built drawings and revised design for a crawler mounted rock drill.

Development of a 3D model and all structural steel shop drawings for the fabrication of a steel entry canopy for a local hotel.

ProGraph worked with the fabrication shop to model and develop a full set of fabrication shop drawings for a lined coal chute.

A vac truck body was fully measured and documented by ProGraph Solutions, a 3D model created and from that model fabrication sequencing and detail drawings were created.

Working with a structural engineer ProGraph Solutions was contracted to design a handful of temporary steel bridges rated to CSA CL800 for emergency use in the north.

Working with a structural engineer ProGraph Solutions was contracted to develop shop drawings for the fabrication of a replacement two lane highway bridge for installation in southern British Columbia.

ProGraph was consulted to develop a finalized design based upon parameters given by the project engineers and architects, from that design a set of shop drawings for the hot dip galvanized stair and landing were created.

Given a few base parameters ProGraph Solutions designed and modeled a new fire retardant storage tank complete with manways, piping connections, handrails and ladders. Upon approval of the conceptual drawings a full set of detailed shop drawings were created and sent to the shop floor for fabrication.

Using sketches supplied by the client a quick model and set of general arrangement drawings was created for a 6000L tank truck body to allow for regulatory agency certification.

Working from a concept sketch ProGraph was tasked with developing a set of fabrication drawings for a large enclosed dewatering pump skid.

ProGraph Solutions designed, modeled and created the drawings for a custom flat deck with integrated ladder to be mounted on a 1951 GMC truck.

A small part of a much larger project where a custom warehouse and shop space was designed using multiple 40 foot shipping containers mounted together, cladded and positioned adjacent to an existing structure.

ProGraph Soluitions worked to develop a concept design of a 65 foot cantenary tower to support the power cable for a mining shovel.

A small section of a drawing showing an HVAC ducting for a restaurant.

A simple aluminum radiator cap modeled in Solid Edge to be CNC machined to replace a damaged component on an older logging truck.

A really quick rendering of a older style light bar design that is beginning to take shape.

A screen shot from Solid Edge showing a new obstruction free wheel chair ramp and set of stairs; following the completion of the model a detail set of shop drawings will be created.

ProGraph Solutions was tasked with the development of fabrication drawings for an aluminum hopper bottom bin meant for use in a corrosive mine environment for loading of reagent into the mill process.

Detailed fabrication drawings complete with concrete plans for the construction of a large welcome sign located in Behchoko, Northwest Territories.

With safety being paramount a local mine required another means for workers to board mine haul trucks. The platform with sliding draw bridge was designed and detailed. by ProGraph Solutions; the completed drawings were sealed and certified by an engineering firm.

ProGraph Solutions was contracted to measure an existing pulp mill and from those measurements fit in a new set of chutes. The chutes were complete with diverter gates, liners and lifting lugs were fabricated and installed to reconnect the chip reclaim conveyor with the screens.

A new set of stairs was designed to replace an aging set currently residing in a very corrosive environment. The stairs were modeled in 3D following extensive measurement of the existing facility and from the model a set of detailed fabrication drawings created.

The building of a new three season deck required permitting and structural drawings prepared by ProGraph Solutions with the engineering and detailed structural calculations undertaken by a third party.

ProGraph was consulted to create a set of as-built drawings for a 700 lbs capacity tool cart with lifting provisions for regular use with an overhead crane. Once the drawings where completed a 3rd party engineer reviewed and sealed the drawings.

A Solid Edge user posed a question online asking how one might create an accurate model of a steel cable in Solid Edge, while it took some doing we were able to build a model of the cable. Not really practical for working drawings or models the question was a challenging one to answer.

Development of a new line of model railroad kits has begun with this 80% scaled version of a 200 foot tall microwave tower, designed in Solid Edge, printed in PLA on the Ultimaker 3 with an instruction sheet developed in Modo. Printed in HO Scale on one of our 3D printers this kit will soon be available for purchase, for pre-release inquires please contact our office. See the model standing at roughly 18 inches tall in person on the new model railway at the Prince George Railway and Forest Museum - 850 River Rd., Prince George, B.C. - www.pgrfm.bc.ca

Another model kit available for purchase, a 3D printed HO scale quonset hut designed in Solid Edge, printed in silver PLA with full instructions developed in MODO and assembled in BricsCAD.

Drawing inspiration from a photograph of a heavy steel manufacturing facility from around 1940 work has started on the creation of a new 3D printed model kit of the facilitie's overhead crane. Once completed the kit will be available for sale along with printing profiles and assembly instructions.

Another tower in our line of 3D printed model kits is this 230 kV transmission tower, availible in multiple scales on the website above.

A couple quick renderings of a customer service kiosk; the initial concept model was crated in CAD and once refined a couple presentation renderings were created; follwing this a set of detailed cabinetry plans were developed to aid in the fabrication.

For his new office space, the owner of Concept One Autoworks tasked ProGraph Solutions to develop a backlit logo sign for installation in the office. The sign was modeled in 3D using Solid Edge, a detailed set of drawings were created for plate cutting, forming and installation. Once the 3D CAD model was created it was transferred into MODO where a quick presentation rendering was created to help convey the idea of the completed sign.

If you are looking for a body shop to finish off your project car give Richard Katalinic a call at Concept One Autoworks.

ProGraph Solutions was approached by a local builder to develop a set of conceptual renderings for the renovation of an existing office space with the intent of effectively communicating the vision of the project team to the stakeholders.

To show staff and clients how the completed office building entry would look a set of conceptual rendering were created from the construction drawings which were also developed by ProGraph Solutions.

A rendering of a 1920's style pair of glasses that will be used as a prop in a larger rendering.

A concept rendering of a older style light bar design that is beginning to take shape.